home *** CD-ROM | disk | FTP | other *** search
/ Belgian Amiga Club - ADF Collection / BS1 part 41.zip / BS1 part 41 / Pro-net demo.adf / read.me < prev    next >
Text File  |  1987-12-21  |  4KB  |  103 lines

  1. ***************************************************************************
  2. I. Introduction:
  3.  
  4.    The schematic capture PRO-NET demo disks come with the following file
  5.    sets:
  6.  
  7.    * PronetDir: The data dictionary of the PRO-NET's databases.
  8.    * PronetLib: PRO-NET's databases.  This includes all symbol libraries,
  9.                 device libraries and schematic libraries.
  10.    * Demo_File: This is a recorded input used by the AutoDemo program in
  11.                 Auto_Run mode.
  12.    * AutoDemo:  Auto_Run program will show you all the key features
  13.                 of PRO-NET.  This program will sequence through three
  14.                 major steps:
  15.  
  16.                 ** Basic: AutoDemo will walk through all major features
  17.                           without taking any actions.
  18.                 ** Intermediate: AutoDemo will show some basic operations
  19.                           such as device calling(auto number assignment),
  20.                           dragging, deleting, swapping gate, etc.
  21.                 ** Advance: Finally, AutoDemo will show a full feature
  22.                           operation with such actions as move, modify,
  23.                           bus creation, repeat, step and so on.
  24.                           This is not a simulated demonstration.  We
  25.                           actually recorded all the actions a design
  26.                           engineer did while she was entering a schematics.
  27.                           This included mistakes she made and all the
  28.                           necessary steps she took in order to correct
  29.                           them.
  30.  
  31.    * Demo:       This is a full feature PRO-NET with the following
  32.                  limitations:
  33.  
  34.                  ** no defined device save in library, print and plot
  35.                     operations.
  36.  
  37.                  ** The maximum number of callable device type is seven.
  38.  
  39.    * PNDIR:     The data dictionary of the PRO-NET's databases.
  40.  
  41.    * PNLIB:     PRO-NET's databases.  This includes all symbol libraries,
  42.                 device libraries and schematic libraries.
  43.  
  44.    * PNPOST:    Post processing files such as BOM, NET-LIST and so on.
  45.  
  46.    * Pronet.feature: Description of PRO-NET commands and features.
  47.  
  48.    To ensure the operation of these demo programs, you should not directly
  49.    modify and/or rearrange any of these file sets.
  50.  
  51. II. Running the demo programs:
  52.  
  53.     ** Note: The AutoDemo has to be in drive DF0: in order to run properly.
  54.              This restriction, of course, does not apply to the real
  55.              PRO-NET or the Demo.
  56.  
  57.     A. AutoDemo:
  58.  
  59.        * In Workbench environment:
  60.  
  61.             . Boot up with the Workbench disk.
  62.             . Insert Pronet.Demo disk into drive DF0:
  63.             . Double click on the disk icon.
  64.             . Double click on the AutoDemo icon.
  65.  
  66.          While Autodemo is running, you can:
  67.  
  68.             . Hit space bar to freeze the demo program. Hit space bar again
  69.               to continue.
  70.             . Hit ^C key to exit AutoDemo.  This will bring you back to the
  71.               Workbench screen.
  72.  
  73.        * In CLI environment:
  74.  
  75.             . Open the CLI window.
  76.             . With the Pronet.Demo disk in drive DF0:, type df0:AutoDemo.
  77.  
  78.          The space bar and the ^C keys also work in this mode.
  79.  
  80.     B. Demo:
  81.  
  82.        The Demo gives you full control of all the operations including
  83.        save and post-processing with some limitations mentioned above.  The
  84.        Demo program can be started the same ways as described above.
  85.  
  86.        WARNING:
  87.  
  88.        This program should be run on a copy, not the original disk. Also
  89.        do not modify any file on the AutoDemo disk since it may
  90.        interfere with the AutoDemo program; which runs on a prerecorded
  91.        sequence and, therefore, expects data in a certain ways.
  92.  
  93.        Copyright (c) 1987 by Prolific Inc.  All rights reserved.
  94.  
  95.        Prolific Inc.
  96.        1808 W. Southgate Ave.
  97.        Fullerton , CA 92633
  98.        Tel: (714) 447-8792
  99.        Telex: 5106016526 PROLIFIC CALIF
  100.        Western Union Easy Link Mail Box 62935949
  101.  
  102. ****************************************************************************
  103.